Description
PA66GF25 Polyamide Nylon insulating profile thermal break mould extrusion machine
Product Description
The
utility model mainly uses the special screw to make the polyamide nylon 66 and
the glass fiber obtain good plasticization, and the extrusion moulds/tools
extruded into a thermal insulating profile, which is widely applied to the
doors, windows and curtain wall aluminum sheets through the different sections
of the moulds/tools.
PA66+GF25
pellets after drying machine into the hopper into the barrel, screw and pellets
contact with the rotation of the screw forced to promote the spiral groove die
direction. Because the screw barrel gap is small, the granular material is hot
body under great pressure in the forward process; the temperature of the
electric heating ring body is plasticizing nylon thermosol. Nylon plastic and
plastic compression heating hot melt by extrusion molding, after traction,
cutting or rolling process and become adiabatic adhesive tape products.
Vidoe of PA66GF25 Polyamide Nylon insulating profile thermal break mould extrusion machine
Photo of PA66GF25 Polyamide Nylon insulating profile thermal break mould extrusion machine
Why use
polyamide profile as thermal barrier function?
1. Because polyamide profile including Polyamide and glass fiber, Its Strength
can reach requirement for aluminum profile window, door, curtain and walls.
2. Conductivity of polyamide strip is very low, prohibit hot air or cold air
transferred from outside to inside, energy saving product.
"Wear a process" heat insulation material - the current domestic
thermal insulation profile is polyamide 66+GF25 (Polyamide66, commonly known as
nylon 66+25% glass fiber)
1 main materials PA66+GF
2 density (g/cm3) 1.3
3 tensile strength (N/mm2 = 110)
4 elastic modulus (N/mm2) 900
5 thermal conductivity (W/m2.k) 0.3
6 hot deformation temperature (℃) 250
Application of polyamide profile:
1. Used for thermal break aluminum window, door, curtain and walls
2. Many customer use thermal break aluminum profile to do big air conditioner to keep heat of cold air, then make use of energy saving
PA66GF25 Polyamide Nylon insulating profile thermal break mould extrusion machine including:
|
1, Raw material loading device(automatic) |
|
2, Raw material drying device |
|
3, Main thermal break strip extruder |
|
4, Polyamide strip moulds / tools |
|
5, Multiple polyamide strip collector |
|
6, Control cabinet |
