EPS plastic foam cold pressing styrofoam densifier is a Styrofoam recycling machine, which can smash the waste Styrofoam materials into small pieces by the blades and gears, and then it could be easily compressed into tight foam ingots at a ratio of 50:1. After compaction, the waste Styrofoam can be reused to make other products, such as frame products and construction moldingsIn addition, the applicable materials also include XPS, EPP, food trays and cups. EPS foam cold pressing styrofoam densifier is able to eliminate all your waste foam recycling concerns.
EPS plastic foam cold pressing styrofoam densifier to reduce the size of expanded polystyrene foam and expanded polypropylene foam for easier transportation. It is also called EPS densifier and styrofoam compactor. It is widely used in sea food processing plant, electronic factories, White goods and black goods stores, and the supermarkets.
Video of EPS plastic foam cold pressing styrofoam densifier:
1.Twin shaft crushing blades. This machine adopts manual feeding, the material will be crushed by blades on the twin shaft, then through the screen conveyed into the barrel of the main machine.
2. The material will be processed by the high speed rotary screw to the barrel, then the high press to reduce the volume density, then hydraulic blade cut them to pieces for easy storage and transportation.
3.The shapes of the products can be designed according to customers' requirements.
EPS plastic foam cold pressing styrofoam densifier for the environment:
1.EPS is uniquely recyclable – all manufacturing waste can be fully reprocessed as can the products at end-of-life.
2.EPS is comprised of 98% air and therefore only 2% polystyrene making it a highly efficient use of raw material.
3.Although EPS is derived from a non-renewable resouce - oil, it represents less than 0.1% of crude oil usage.
4.As EPS is highly energy efficient – the energy saved over the lifetime of an insulation panel.