Description
PET plastic high quality recycling machine, plastic bottle reusing recycling machine
Description:
This plastic recycling machine is to crushing washing recycling the waste plastic PET bottles. This PET plastic recycling machine is consist of label remover, sortor, crusher, cold washer, hot washer, dewatering, packing system. It can get the clean PET flakes from PE PP cap, oil, PVC label, then use the PET flakes again, to avoid plastic pollution.
This PET plastic recycling machine can easily wash and recycle waste PET bottles. Waste and dirty PET bottles can be disposal step by step in this PET plastic recycling machine. It is special for recycling PET bottles. We equipped drying system at the end of the washing line so that completely dry flakes can be collected and packed directly after been washed.
The whole PET plastic recycling machine can designed based on how dirty the PET bottles are, and make sure of the quality of the final products.
Coordinating the production line with follow processing work (PET pelletizing machine), and it will make waste and dirty PET bottles to be the PET pellets material, and can to producing new PET bottles.
The whole line includes(customizable):
Metal Chain Convery→De-Baler(Baler Opener) →Belt Conveyor→Tromel→Belt Conveyor→Label Remover→Sorting Table→Metal Detactor→Belt Conveyor→Crusher→Screw Loader→Floating Washer→Friction Waser→Hot Washer→Screw Loader→Friction Washer→Floating Washer→Dewatering Machine→Zig-Zag Separater→Silo
The video of PET plastic high quality recycling machine
The function of some main parts:
· Belt Conveyor: The materials go into the crusher by the crawler belt, which is move by inside scroll wheel.
· Label Remover: Remove the label from the bottles.
· Manual Sorting Belt: If the label still in the bottle, worker can remove the label by hand. In addition, can separate the different color by hand.
· Crusher/Grinder: Crushing the material into small size.
· Screw Loader: to transform the material to next step.
· Hot Washer: To washing off the dirty, like oil, sand, in hot washer need use the detergent, then can get very clean PET flakes.
· High-speed Friction Washer: Through the high speed on the shaft of the vane flap and spray water to the common function of good cleaning effect.
· Floating Washer: It used in cleaning pet flakes, make the flakes cleaner and whiter. Also is the necessary equipment of the bottle and bottle cap.
· Dewatering: Rejection the water from the flakes, moisture content is less than 2%.
The whole PET plastic reusing recycling machine:
Bale breaker / de-baler:
Label remover:
Plastic grinder, crusher:
Hot washing tank :
Friction washing machine:
The washed PET flakes:
Technical data
|
Input capacity |
1000kg/h |
1500 kg/h |
|
|
Workshop(M*M*M) |
60 (L)×10(W)×6(H) |
70(L)×10(W)×6(H) |
90(L)×18(W)×6(H) |
|
Labor |
8Persons |
10 Persons |
14 Persons |
|
Installation power |
240KW |
307KW |
420KW |
|
Water needed: |
4~5Ton/h |
6~8Ton/h |
8~10 Ton/h |
|
Final flakes |
Moisture: max 1.5%
Bulk density:
Particle size: 10-16mm
Metal content: max.20ppm
Floatable contamination: less than 200ppm
Total impurity: 320ppm |
Moisture: max 1.5%
Bulk density:
Particle size: 10-16mm
Metal content: max. 20ppm
Floatable contamination: less than 200ppm
Total impurity: 320ppm |
Moisture: max 1.5%
Bulk density:
Particle size: 10-16mm
Metal content: Max. 20ppm
Floatable contamination: less than 200ppm
Total impurity: 320ppm |
After this PET plastic recycling machine line, we also supply the following production lines of PET plastic pelletizing machine, that to make the PET flake become the PET pellets.
