High Standard EPS Foam Hot Melting Styrofoam Densifier

Description

High Standard EPS Foam Hot Melting Styrofoam Densifier

High Standard EPS Foam Hot Melting Styrofoam Densifier is a Styrofoam EPS recycling machine, which can smash the waste Styrofoam materials into small pieces by the blades and screw, and then it could be easily compressed into tight foam ingots at a ratio of 90:1. After compaction, the waste Styrofoam can be reused to make other products, such as frame products and construction moldings.

In addition, the applicable materials also include XPS, EPP, food trays and cups. Wedo EPS recycling machine is able to eliminate all your waste foam recycling concerns.

High Standard EPS Foam Hot Melting Styrofoam Densifier to reduce the size of expanded polystyrene foam and expanded polypropylene foam for easier transportation. It is also called EPS densifier and EPS compactor. It is widely used in sea food processing plant, electronic factories, White goods and black goods stores, and the supermarkets.

High Standard EPS Foam Hot Melting Styrofoam Densifier photos:

High Standard EPS Foam Hot Melting Styrofoam Densifier description:

1.Twin shaft crushing blades. This machine adopts manual feeding, the material will be crushed by blades on the  twin shaft, then through the screen conveyed into the barrel of the main machine.

2.The screw of the main machine can convey and heat the EPS material to melting state, then extruding them and hydraulic blade cut them to pieces for easy storage and transportation.

3.The shapes of the products can be designed according to customers' requirements.

High Standard EPS Foam Hot Melting Styrofoam Densifier principle:

The twin shaft are two parallel shafts with blades, they running in different rotation direction. Each shaft has blades and driven by the gear box, to crushing the EPS material then the material will get throught the sreen into  the barrel. The material will be processed by the high speed rotary screw to the heating barrel. Then EPS material will be melt under high temperature and can extruding to expected shapes.

High Standard EPS Foam Hot Melting Styrofoam Densifier for the environment:

1.EPS is uniquely recyclable – all manufacturing waste can be fully reprocessed as can the products at end-of-life.

2.EPS is comprised of 98% air and therefore only 2% polystyrene making it a highly efficient use of raw material.

3.Although EPS is derived from a non-renewable resouce - oil, it represents less than 0.1% of crude oil usage.

4.As EPS is highly energy efficient – the energy saved over the lifetime of an insulation panel.

Inquiry Us